GPR Shipping Lists and Other Pertinent Info
The following information assists the renter with information to more accurately estimate GPR shipping costs. Please note that actual
Below are sample GPR shipping lists for some of the GPR units that we rent. This will give renters an idea of what they will receive when ordering an instrument. All packing lists are approximates and will vary depending on the specific order. Some items may be incomplete as we are currently updated our inventory.
Near the bottom of each list are the instrument’s pelican cases, shipping boxes, or containers along with the shipping dimensions. Again, these are approximates and vary depending on the actual equipment in the order but they should help the renter determine a close shipping cost estimate.
All GPR equipment ships from:
13129 Green Bay Rd
Mequon, WI 53097
For the most accurate quotes, log into your Fedex or UPS account and enter the dimensions of the desired equipment. GPR Rental cannot see third party account’s rates. Often renters receive a better discount than GPR Rental because we ship on a third party account more than 90% of the time and therefore receive little discount for volume.
Declared Value with the Fedex or UPS.
Per GPR Rental’s Terms and Conditions, it is the renter’s responsibility for equipment during transit. Hence, the reason we require proof of rental insurance. If no value is declared, Fedex or UPS is only liable for $100. We have found that this does not give Fedex or UPS much incentive to look for lost or damaged equipment.
We strongly suggest declaring a value that your company feels will protect the equipment from these issues. Often, customers declare full replacement value. Some customers declare the amount of their insurance deductible. Declaring a value is not required but the renter is responsible for any damage or loss during the rental including transit. In general, it adds about $10 per $1,000 of declared value to the total shipping bill.
GPR Packing List Examples
Sensors & Software LMX GPR Shipping List
1 x SmartCart with LMX with 250 MHz antenna
1 x Digital Video Logger With Pelican Case
2 x SmartCart Power Supply in Pelican Case
2 x SmartCart Power Supply Charger
1 x Set of 2 Adapters for Hanging 250 MHz Noggin Antenna
4 x SmartCart Swivel Mounting Post and Pin Sets
1 x Enhanced DVL Keeper Mounted on Handle
1 x SmartCart Odometer and Cable Mounted on Left Rear Wheel
1 x Compact Flash Card Reader
*1 x Cardboard Box (46’’x24’’x19’’, 110lbs)
*All dimensions are approximate and will vary depending on configuration and how each instrument is packed. Some shipping containers may be larger/heavier than others containing the same instrument.
Sensors & Software Noggin GPR Shipping List
1 x SmartCart with Noggin 250, 500, or 1000 MHz antenna
1 x Digital Video Logger With Pelican Case
2 x SmartCart Power Supply in Pelican Case
2 x SmartCart Power Supply Charger
1 x Set of 2 Adapters for Hanging 250, 500, or 1000 MHz Noggin Antenna
4 x SmartCart Swivel Mounting Post and Pin Sets
1 x Enhanced DVL Keeper Mounted on Handle
1 x SmartCart Odometer and Cable Mounted on Left Rear Wheel
1 x Compact Flash Card Reader
1 x Dongle with Software and Manuals (if requested)
1 x GPS Mount (if requested)
*1 x Cardboard Box (46’’x24’’x19’’, 120lbs)
*All dimensions are approximate and will vary depending on configuration and how each instrument is packed. Some shipping containers may be larger/heavier than others containing the same instrument.
Lower frequency antennas tend to weigh more than higher frequency antennas in the same configuration. If interested in the dimensions for SmartTow or SmartHandle, please contact us.
Sensors & Software pulseEKKO Pro GPR Shipping List
1 x PE Pro Model Digital Video Logger
1 x Optical Coupler
2 x Short Fiber Optic Cables (RX to DVL)
2 x Short Fiber Optic Cables (Rx to Tx)
2 x 20m Fiber Optic (Rx to Tx) (if requested)
1 x Set of Quick Guides
1 x PE Pro SmartCart with Odometer Mounted on Left Rear Wheel
4 x Wheels, 2 x DVL Carrier Mounted on Handle
1 x 50/100 MHz Conversion Kit with hangers
1 x Set of 50 MHZ antennas
1 x Set of 100 MHZ antennas
1 x 200 MHz Conversion Kit with hangers
1 x Set of 200 MHZ antennas
2 x Batteries in Pelican Cases
2 x Battery Chargers
1 x GPS Staff (if requested)
1 x Yellow Power Supply Cable
1 x Transmitter, 1 x Adaptor Block
4 x Chargers and Cord for Transmitter and Receiver Batteries
8 x TX/RX Batteries
1 x Cart Parts Kit (1 large hitch Pin, 4 small hitch pins, 4 thumb screws, 4 male connector pins, 4 female connector pins)
1 x Billable Spares Kit (1 large hitch Pin, 4 small hitch pins, 4 thumb screws, 4 male connector pins, 4 female connector pins)
1 x Software Dongle (if requested)
1 x Compact Flash Card Reader
1 x Allen Wrench Set, 1 x Flathead Screw Driver
1 x Ultra Receiver, 1 x Adaptor Block
*1 x Cardboard Shipping Box (59’’x21’’x13’’, 100lbs)
*1 x Pelican Case (20’’x16’’x8’’, 15lbs)
*1 x Pelican Case (24’’x20’’x 10’’, 30lbs)
*1 x Pelican Case (24’’x20’’x10’’, 40lbs)
*1 x Black Pelican Shipping Tube for 50 MHz Antennas (81’’x9’’x7’’, 20lbs)
*All dimensions are approximate. The pulseEKKO packing list, dimensions, and weights can vary greatly depending on configuration and antenna selection. Some shipping containers may be larger/heavier than others containing the same instrument.
Sensors & Software TR1000 or Conquest GPR Shipping List
1 x pulseEKKO Pro TR1000 or Conquest Antenna
1 x DVL with PulseEKKO Control Module
1 x pulseEKKO Pro Control Module Cable
1 x DVL to Antenna Cable
1 x Power Supply Cable
2 x Battery Belts
1 x Battery Charger
1 x Flash Card Reader
1 x Handle
2 x Shipping Containers (28’’x22’’x16’’, 47lbs and 76’’x8’’x8’’, 10lbs)